Lattice Towers & Masts

Switchcom Distribution brings you Guyed Lattice and Free Standing Lattice Towers & Masts. All components on the structures are hot dip galvanized to the highest specifications. All nuts and bolts are of grade 8,8 quality and only High Tensile S355 hot rolled tubes is used in the manufacturing of the steel structures.

Guyed Lattice Towers

Made with 42,9mm x 2,5mm S355 High tensile Tubes & 10mm roundbar for the lattice works on the medium duty towers. 12mm roundbar is used on the heavy duty towers. All the flanges used to bolt the 3m sections together is laser cut and is bolted together with 9 x M12 grade 8,8 high tensile bolts per 3m section.

Structure is hot-dip Galvanized to international standards, no paint is needed as a protection against the elements but can be added if needed (Red/Orange & White to aviation specifications)

Aircraft warning lights can be supplied and installed to the tower on request.

Earth mat cable & spikes as a down conductor can also be supplied & installed on request.

Engineered designed from 6m – 60m with a 300kg top load.

This tower is free standing up to 15m with a 300kg top load and a 150mm deflection.

From 18m up galvanized steel guy ropes is used.

This design can handle loads up to 3m2, and can handle wind speeds up to 40m/s.

Guyed Lattice Tower or Mast

Free Standing Lattice Towers

The Free Standing Lattice Towers are made with 60,3mm x 2,5mm S355 High tensile Tubes with 32mm x 2,5mm S355 tubes for the brazing works on the medium duty towers. 60.3mm x 4mm S355 High tensile is used with 38.1mm x 2.5mm S355 High tensile on the heavy duty towers. Flanges is laser cut using 16mm steel, bolted together with 3 x 20mm grade 8,8 high tensile bolts per flange.

This tower face is 1100mm wide from centre-to-centre of vertical pipes.

The structure is hot dip galvanized to International standards, no paint is needed as a protection against the elements but can be added if needed (Red/Orange & White to aviation specifications.)

Aircraft warning lights can be supplied and installed to the tower on request.

Earth mat cable & spikes as a down conductor can also be supplied & installed on request.

This tower comes in a “Knock-Down” kit for easy transport and handling on site – see gallery for pictures.

a 24m tower can easily be loaded on a normal 1 Ton pick-up “bakkie” weighing about 950kg for a 24m tower with all the bolts & nuts included.

Engineered designed from 12m – 25m

This is a free standing structure.

This tower can handle loads up to 2m2, with a wind speed of 40m/s.

Free Standing Lattice Tower or Mast

Interested?
Contact your sales representatives for more information!


Sale

Unavailable

Sold Out